Best Tattoo Machines for Beginners

Who Makes The Best Tattoo Machines And Tattoo Tools?

Who Makes The Best Tattoo Machines And Tattoo Tools?

The origin of tattoo machines, thanks to every promoter of tattoos

A simple mechanical operating principle
Bringing pure craftsmanship to the mechanical age
Paying tribute to the industrial revolution era that belongs to tattoo craftsmen
Tattoo machines are cool tattoo guns in the eyes of passers-by
But in the eyes of tattoo artists, this machine is a tool for making a living

Today I will tell you the origin story of the tattoo machine,
a tool that was born out of a wonderful accident.
Before the advent of tattoo machines, early tattoos were called tattoos. Since tattoos around the world are made by manually inserting a monochrome tattoo needle into the skin, the color of the pattern after repair is mostly blue, which is also the origin of the name tattoo.
Traditional tattoo hand needle
Electromagnetic induction was discovered by Danish inventor Orestes in 1819. This basic electrical principle is how all patented tattoo machines work.

 In 1876, Thomas Eva Edison, a mad inventor from Newark, New Jersey, invented and patented a rotating electromagnetic machine that used batteries. At that time, it was for the ink pen to punch holes in the content paper to copy handwritten materials. Then the ink shaft rolled over the perforated paper, and a copy of the original material was completed.

In 1877, Edison had a new idea and made a slight change, adding a curved reed that vibrated on the coil and produced reciprocating motion for the ink plate. Electromagnetic power punching tools have been developed for a long time.

And this principle, if you look closely at the operation of Edison's patent, you can see that this machine can be easily adopted by the tattoo process.


Then in Italy an Italian inventor improved the battery. All early tattoo machines and models were battery powered. This device marked the beginning of the endurance of the equipment used by most tattoo artists today.

In 1891, after only slight modifications by Edison, Samuel O'Reilly saw the future of this tool and patented the first tattoo machine in the United States. O'Reilly's modifications included: improved assembly tube with ink cartridges, a switch, punch straightener and pin clamp type needle belt.

In 1892, Samuel O'Reilly invented the electric tattoo machine. Since then, modern tattooing has entered a period of rapid development. It only causes a slight pain and is fast. A simple tattoo can be completed in a few minutes.

Charlie Wagner of New York City also received a patent for a tattoo machine in 1904. Many historians believe that O'Reilly had a dominant influence on the development of the tattoo machine, however, an examination of the original sketches shows that both products used Edison's design ideas.

What most people consider to be the true tattoo machine was designed by Bosch-Witt of Detroit in 1929. Of the more than 1,000 patents for such machines, Witt was not the first, and the name of the original designer has been lost in the history of tattooing.

Witt's machine was a standard double-solenoid type (a spring-loaded machine), but the coils were placed horizontally with the frame. Other improvements included a touch switch, spark protection, and a needle that could cut the plastic film. He produced and sold a variety of different machine types over the years as a supplier. Witt appears to be the only early tattoo machine inventor to have made a profitable patent market.

The coil tattoo machine consists of the frame (which can be stamped, cast, wire cut, or welded), magnetic coil, capacitor, vibration suspension, shrapnel, adjusting top rod screw and other main components, none of which can be missing.

In 1978, the famous German tattoo artist Manfred Kohrs invented the first motor tattoo machine in history.

Early tattoo machines were crude and mostly handmade, with high manufacturing costs and a single pattern. At that time, electric tattoo machines beat 1,000 times per minute and only pierced the epidermis of the skin, with a depth of only 0.8-1 mm. Today, the manufacture of tattoo machines has reached perfection, and electric tattoo machines beat 30,000 times per minute.

Working principle of coil machine (shrapnel machine):

The transformer is connected to 220v (converted to 110v) and 50hz AC is converted into DC and then connected to the tattoo machine. The working voltage is 0-15V. The two main coils and the square magnet block generate a magnetic field to play a spraying and suction role. The square magnet block uses the elastic force of the shrapnel to generate high-speed up and down reciprocating motion. The square magnet block drives the tattoo needle to work and penetrate the skin surface to bring the pigment into the epidermis!

Power the two coils, turning them into electromagnetic coils

Attract the armature to move, vibrate the tattoo machine downward, and the contact rod disconnects the conductive contact

Cut off the current, causing the coil's magnetism to disappear

The armature returns to its original position under the drive of the spring, allowing new current to flow through again

This is how the coil machine works.
Working principle of the motor machine:

The motor machine is a motor that converts the rotation of the motor into up and down motion through the torsion shaft). The motor machine is driven by a motor. The principle is similar to that of a razor and the tattoo is the same. Relatively speaking, the motor machine has less noise and vibration (if it works for a long time, the motor has higher requirements). Lightweight, powerful, no noise, super stable, easy to adjust, and easy to use.

The motor's rotational motion is converted into linear motion in the needle.
If the coil machine is the label of the industrial revolution, then the motor machine to the pen-shaped tattoo machine is the technological revolution. It is like the update from keyboard mobile phone to touch mobile phone. The tattoo pen is lighter, more stable, and clean. The disadvantage is: the integrated needle tip needle is expensive, and the cost performance of the consumables is not high.


From the time Edison first used the ink pen to punch holes to the present, the machine has been improved for hundreds of years.

No matter how much it has improved, the perfect tattoo machine for every artist has not yet appeared;

Almost all tattoo artists will modify and adjust the machine according to their own needs and uses to suit themselves. The tattoo machine has also become a very personal tool. It can be said that no two machines are the same.

There are still many inventors designing and developing tattoo machines in the United States and Europe. Most of these inventors are unable to obtain patents for their designs due to time and money, probably due to the lack of original design. However, as market capitalization deepens, tattoo machines will slowly evolve into better tools.

In theory, at least, that’s how it’s used. Sometimes, changes made to a machine don’t make it any better when the inventor is operating it, but the same thing applies everywhere: in this process of trial and error, what is an improvement for one person may even be an obstacle for another, and so the search continues.

There is no best machine in the world, only the best technology
But the tattoo machine will always be a treasure in the hands of every tattoo artist
Thanks to the heroes behind the scenes who have silently contributed to tattoos

Читать далее

The Ultimate Guide to the Prospects of USA Tattoo Artists
What would it be like to cover a tattoo with skin color?

Оставить комментарий

Все комментарии перед публикацией проверяются.

Этот веб-сайт защищается reCAPTCHA. Применяются Политика конфиденциальности и Условия использования Google.